Harmco Sales Corporation is a manufacturers' representative business representing the nation's finest building materials and supplies.
We sell only to dealers and distributors.

STYLE-RITE INDUSTRIES
ALUMINUM RAILING
Commercial and Residential

Style-Rite Designer Aluminum Railing features a baked on enamel finish in white, bronze, black, clay and almond. This railing is recommended for commercial use, but can be used for new homes and replacing rail on older homes and buildings of all types. The Designer railing meets the requirements of Boca Code, it is made from heavy gauge aluminum and weldless design for safety. Railing has been tested by an independent testing laboratory. Results available upon request.

*** ASK ABOUT OUR NEW DESIGNER SERIES 2 RAILING SYSTEM ***

Part Number Railing Section Heights Available
D-102, 36, 42, 48 2 ft. Rail Section 36" - 42" - 48"
D-103, 36, 42, 48 3 ft. Rail Section 36" - 42" - 48"
D-104, 36, 42, 48 4 ft. Rail Section 36" - 42" - 48"
D-105, 36, 42, 48 5 ft. Rail Section 36" - 42" - 48"
D-106, 36, 42, 48 6 ft. Rail Section 36" - 42" - 48"
D-107, 36, 42, 48 7 ft. Rail Section 36" - 42" - 48"
D-108, 36, 42, 48 8 ft. Rail Section 36" - 42" - 48"
D-109, 36, 42, 48 9 ft. Rail Section 36" - 42" - 48"
D-110, 36, 42, 48 10 ft. Rail Section 36" - 42" - 48"
D-111, 36, 42, 48 11 ft. Rail Section 36" - 42" - 48"
D-112, 36, 42, 48 12 ft. Rail Section 36" - 42" - 48"
D-113, 36, 42, 48 13 ft. Rail Section 36" - 42" - 48"
D-114, 36, 42, 48 14 ft. Rail Section 36" - 42" - 48"
Complete installation instructions are packed with each rail section. Standard commercial railing height is 36", 32" pickets, 4" on center and 4" extended picket.

Other Sizes Available
Rail height 42" with 38" pickets, 4" on center and 4" extended picket.
Rail height 48" with 44" pickets, 4" on center and 4" extended picket.
Other sizes either or lower or higher could be made upon request.
Two center support flanges required on 5', 7', 9' and over. One required for 4', 6', and 8'.

Designer Railing
2 1/2" Top Channel, 2 1/2" Bottom Channel
A-Style - 3/4" x 1/2" pickets on 4" Centers.
B-Style - 2" x 1/2" pickets on 4" Centers.

Newel Posts
2 3/4" x 2 3/4"
Heights 38", 44", 50"
Bottom flange is welded on (M.I.G. weld) with a 2 3/4" bead on each side for extraordinary strength.

All connectors are cast Alum-Alloy. A380
All fasteners are Stainless Steel.
All Aluminum extrusions are Alloy 6005-T5. (30-40% stronger than 6063-T5)

AVAILABLE COLORS


White
Black
Bronze
Clay
Almond

Newel Posts & Railing Accessories
DNP-38..........38" Newel Post
DNP-44..........44" Newel Post
DNP-50..........50" Newel Post
D-200.............Straight Connector Adapter
D-201.............Straight Connector (4 per pkg.)
D-202.............Pitched Rail Connector (2 per pkg.)
D-203A..........3/4" Center Support Flange
D-203B..........2" Center Support Flange
D-205............Cross Over Cap
D-208............Gate Kits
D-209............Horizontal Swivel connector (2 per pkg.)
DHR302........Hand Rail End Knobs
DHR301........Wall Brackets
D-405............Adjustable Newel Post Flange
D-406............Aluminum Bail Caps

D-200 		Straight Connector Adapter

4- per pkg. used for connecting rails to round columns.
D-203 		Center Suppor Flange

Used with 4, 5, 6, 7, 8 foot sections for surface mounting of expanded 3/4" by 1/2" picket.

A-Style / B-Style		 A-Style
3/4" x 1/2" Picket

B-Style
2" x 1/2" Picket
D-205 		Crossover Cap

For connecting rails over posts or for support of long rail sections

D-209 		Horizontal Swivel Connector

2 per pkg. used for octagon or round decks.
DHR-302 / DHR-301

DHR-302
Hand Rail End Knob

DHR-301
Plus Wall Brackets

D-405 		Adjustable Newel Post Flange

Mainly used for ramps or any sloped area.
D-406 		Aluminum Ball Caps

2 1/2" and 2" Cap for Designer Newel Posts.

D-201 		Straight Rail Connector

4 - diecast aluminum connectors

8 - Self-tappingg No. 10 x 1" stainless steel screws
D-202 		Pitched Rail Connector

Package includes:
1 - Cast mounting for top and straight connector
1 - Cast mounting for bottom and straight connector
4 - Aluminum binding bolts
8 - No. 10 x 1" stainless steel screws

Newel Post 		DNP-38
DNP-44
DNP-50

Extruded 2 3/4" aluminum tubing

Available in 38", 44" and 50" lengths
D-501
D-505
D-502 		D-501 Lag Screw
3/8" x 2 1/2"
4 per pkg. stainless steel

D-505 Lead Insert
3/8" x 2 1/2" - 4 per pkg.

D-502 Masonry Anchor
3/8" x 2 1/2"
(curved spike)
4 per pkg. stainless steel

Gate Kits Available

Included in kits, connectors, 2 posts, hinges, latch, striker bar and all screws.

Rail section not included with gate kit.

Optional - a diagonal support picket should be added on gates over 3 oot wide.

Style-Rite Railings have many uses...

POOLS

Style-Rite's top quality fencing is perfect for all swimming pool enclosures. Our railing was designed to meet most stringent swimming pool enclosure laws. The designer series will enhance the beauty and value of your pool and surrounding properties.
BUILDINGS and RAMPS

We can add strength, security and beauty to your commercial building, with our top grade highest quality designer railing. Style-Rite also provides a heavier look which is most appropriate for medium to large commercial jobs. For ramps, entrances and buildings, it will add the finishing touch of elegance.
PATIOS and PORCHES

Choose a Style-Rite designer rail to add a tasteful look to your patio or porch. We assure you that you will be receiving the highest superior railing available. Backed by many years of pride and excellence of workmanship.

CLICK HERE TO RETURN TO TOP OF PAGE

CLICK HERE TO RETURN TO HARMCO SALES HOME PAGE